 
Iron, copper and manganese are the most common metals found in source water.
When pH is low (below 7.0), these metals are in solution. But when
pH is raised, metals can drop out of solution. Scale and metal stains
form even more readily in the hot water of a spa than in pool water.
To keep metals under control, use SpaTime®
Stain and Scale Control according to label directions once
a week. It ties up iron, copper and manganese in the water and prevents
stains and discolored water.
It can also be used to remove fresh stains and to clear up green
water caused by copper or iron in solution. Chlorine levels should
be 1.0 ppm -1.5 ppm prior to adding this product. Always follow
label directions.
This analysis is designed for use only with the Spa TimeŽ brand products named in this computerized water analysis printout, and is correct to the best of RWP, Inc.'s knowledge. RWP is not responsible for any use of this printout with products other than the Spa TimeŽ brand products named in this printout, and use of this printout with other products could result in improper or incorrect treatment of the spa water.
|
|
